How to Draw Glass Walls in Plan

I'll admit, it's been challenging for me to create a DIY tutorial about how you can install molding (otherwise known as trim or paneling) in your dwelling, generally because in that location are a lot of intricacies and I sometimes find information technology hard to empathise it myself, permit alone explain how to exercise it. I felt I had my own quirky approach to this and wanted to make certain that the information I am putting out in that location fabricated sense and was actually useful.

I will say that installing molding can be simple once you lot get the hang of information technology and at present  it'southward almost soothing to measure, cut and install each piece. Unsure if that makes me a sociopath or not.

PLANNING YOUR MOLDING/TRIM

In that location are many many ways to go creative with planning out molding, just here are some things to continue in listen:

• The layout/size of the boxes. Pinterest is filled with ideas, but hither are a few ideas/examples:
  • Floor to ceiling (base to crown), like our living room walls
  • Large and pocket-sized stacked boxes (usually with a chair rail in betwixt boxes) on each wall. This requires more than measuring and cutting but I retrieve it really elevates the expect. I used the box + chair rail + box wait in our chamber and my office.
  • You can fifty-fifty do boxes within boxes….inception.
• How much space you have on each wall, how big you lot want each box to be, and for symmetry, aim to have an odd amount of boxes (usually three) on each wall, unless…
• It's a wall with windows. Walls with windows tin be tricky, only one box on either side of the window would be fine because the window is visually that 3rd box, then you're nonetheless pulling off the rule-of-thirds symmetry
• Whether all boxes should be the same width (i.east. in our bedroom, all middle boxes were slightly larger than the 2 stop boxes).
• If you want the molding fashion to lucifer the mode of your habitation. This is a topic of debate, but I personally chose traditional manner molding for our bi-level. I mean, if Laurel Bern is on board with adding traditional molding to a ranch/bi-level…say no more than.

For this calendar week'due south mail service, I'm repurposing the visuals I created for my DIY Molding IG story tutorial a few weeks agone, equally information technology received some positive feedback. I'd similar to point out that this tutorial is for wall molding only.

If y'all're planning to install crown molding, highly recommend this video and installing the crown before the wall molding

Crappy after + before of our whole living room wall, but it's clear that the molding truly elevated the space – the ceilings even await higher!

Some Q&A'south I addressed via IG stories but would also like to include hither:

Q: Do yous paint the wall and molding the same sheen/colour?

I paint the wall and molding the aforementioned color, but the walls are ordinarily a matte finish and the molding is usually semi or high-gloss

Q: Do you lot recommend using information technology on one wall as an accent or throughout the whole room?

I call back information technology looks more cohesive when it'due south done throughout the room, but it'southward personal preference.

Q: Do you re-paint the wall and molding once it's installed or just the molding?

The fashion I arroyo painting is this:

I paint 1-2 coats on the wall before the molding. Once the molding is installed and caulked/holes are filled, I pigment another coat on the wall using a smaller roller (need to get between the boxes and I hate castor strokes). Then I paint 2 coats of semi or high-gloss on the molding using an athwart brush.

Q: Tin can I add boxes without crown molding?

I personally retrieve crown completes the wait, but you can totally install boxes without crown!

I hope this tutorial was insightful and that yous can use it to install molding in your own domicile! Equally usual, delight reach out or exit a annotate with any questions.

xo

Alisa

barmorerectelon.blogspot.com

Source: https://aglassofbovino.com/2020/03/diy-how-to-install-box-molding-in-your-home/